Power Window Switch Replacement (Right Door)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Use a flat bladed tool in order to pry the power window switch (3) from the door. Pry at the top of the switch.
3. Disconnect the electrical connector (2) from the power window switch.
4. Remove the bezel (1) from the power window switch (3) by prying out the retainers (4) with the flat bladed tool.

INSTALLATION PROCEDURE
1. Install the bezel (1)10 the door power window switch (3).
2. Connect the electrical connector (2)10 the power window switch (3).
3. Install the power window switch (3) to the door.
4. Connect the negative battery cable.