Glove Compartment: Adjustments

Instrument Panel Compartment Door Lock Striker Adjustment




1. Open the instrument panel (IP) compartment door.
2. Loosen the IP compartment striker screws.
3. Adjust the IP compartment striker, as required.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Tighten the IP compartment striker screws.

Tighten the striker screws to 2 Nm (18 lb in).

5. Close the IP compartment.
6. Inspect the IP compartment for proper fit and operation. Repeat the procedure if required.