Front Seat System

The front seat belt system includes the following components:
^ The driver and the passenger seat buckle-side belts
The seat buckle-side belts are attached to the floor panel inboard of the front seats.
^ The driver and the passenger seat retractor-side belts
The driver and the passenger seat retractor-side belts are attached to the floor panel.
^ The driver and the passenger seat retractor-side belts are attached to the roof panel (coupe) or to the body lock pillar reinforcement (convertible).

The driver seat belt system includes a seat belt switch in the driver seat buckle-side belt. The seat belt switch controls a reminder lamp and a tone alarm. The reminder lamp and the tone alarm will not operate when the following conditions exist:
^ The driver seat belt is buckled
^ The driver door is closed
^ The ignition switch is turned ON

The following events will occur when the driver door is closed and the ignition switch is turned ON, but the driver seat belt is not buckled:
^ The tone alarm will operate for 4 to 8 seconds and then turn off.
^ The reminder lamp will operate until the driver seat belt is buckled, or until approximately 1 minute has elapsed.

Refer to Diagrams in Body and Accessories in order to diagnose faults in the reminder lamp or the tone alarm.