Fuel Level Sensor: Service and Repair

REMOVAL PROCEDURE

IMPORTANT: Always maintain cleanliness when servicing fuel system components.

1. Relieve fuel system pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
2. Remove the modular fuel sender assembly.
3. Remove the fuel level sensor (5) from the modular fuel sender.

INSTALLATION PROCEDURE
1. Reinstall the fuel level sensor (5) to modular fuel sender.
2. Reinstall the fuel sender assembly.
3. Tighten the fuel filler cap.
4. Reconnect the negative battery cable.
5. Inspect for fuel leaks.
5.1. Turn the ignition ON for 2 seconds
5.2. Turn the ignition OFF for 10 seconds.
5.3. Turn the ignition ON.
5.4. Inspect for leaks.