Vehicle Customization - Settings : 2

^ FOB HORN (Remote Audible Verification): This feature allows the horn to chirp when the remote keyless entry transmitter is used to lock or unlock the vehicle.
To customize remote audible verification:
1. Scroll until FOB HORN appears on the display.
2. Press the PREV or NEXT button to enter the submenu. Scroll through the following options:
- OFF
- PARTIAL - One chirp for second, third, etc. remote lock/no chirps for remote unlock.
- FULL - One chirp for each remote lock/two chirps for each remote unlock.
^ With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second.
If your vehicle is equipped with the content theft-deterrent system, the first time the remote unlock is pressed three chirps will be heard to indicate an alarm condition has occurred since last arming.
^ ALARM (Content Theft Operation): This feature allows the content theft-deterrent system to be turned on or off.
To customize the content theft-deterrent system:
1. Scroll until ALARM appears on the display.
2. Press the PREV or NEXT button to enter the submenu. Scroll through the following options:
- ALRM OFF
- ALRM ON
3. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second.
4. Press the SEEK button until RETURN is displayed, then press the DISP button to return to the main menu.
^ TRNKJAMB (Trunk Jamb): This feature allows the content theft system trunk lock sensor to be disabled or enabled. To customize the trunk lock sensor:
1. Scroll until TRNKJAMB appears on the display.
2. Press the PREV OR NEXT button to enter the submenu. Scroll through the following options:
- TRNK OFF
- TRNK ON
3. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second.
^ CHIRP (Horn Chirp Timer): This feature allows you to choose between short or long horn chirp sound when the remote keyless entry transmitter is used. To customize the length of horn chirps:
1. Scroll until CHIRP appears on the display.
2. Press the PREV or NEXT button to enter the submenu. Scroll through the following options:
- SHORT-Short Chirp (16 msec)
- LONG-Long Chirp (32 msec)
3. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second.
^ ORIG SET (Return to the Original Settings): This feature allows you to return all feature customization settings back to their original factory settings. To reset:
1. Scroll until ORIG SET appears on the display.
2. Press the PREV or NEXT button to enter the submenu. Scroll through the SET ALL-Returns to factory settings.
3. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second.
^ FOB PROG (Remote Keyless Entry Transmitter Programming): This feature allows you to match the remote keyless entry transmitter to your vehicle. To match the transmitter:
1. Scroll until FOB PROG appears on the display.
2. Press the PREV or NEXT button to enter the submenu. PROGRAM will be displayed.
3. Press the DISP button to start programming. When the message PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned.
4. Repeat the previous for each additional transmitter.
^ EXIT (Exit Feature Customization Mode): This feature allows you to exit the vehicle customization programming. To exit:
1. Scroll until EXIT appears on the display.
2. Press the DISP button on the exit programming. A chime will be heard to verify the exit.