Instrument Cluster Trim Panel Replacement (Tilt Column)

Instrument Cluster Trim Panel Replacement (Tilt Column)

Removal Procedure





1. Tilt the steering column down in order to gain the necessary clearance to remove the IP cluster trim plate.
2. Remove the 2 screws which secure the IP cluster trim plate (2).
3. Disengage the 2 lower clips (1).
4. Gently remove the cluster trim plate (2) from the instrument panel assembly.



Installation Procedure





1. Gently install the IP cluster trim plate (2) by pressing into place until fully seated. Secure the trim plate with the 2 screws.
2. Return the steering column to the upright position.