Circuit Description

Voltage is applied from Hazard fuse to cavity 6 of the hazard switch. When turned to the on position current flows through the switch to cavity 5 where it continues to cavity 2 of the turn/hazard flasher. Cavity 2 applies voltage to the timing coil. At the same time cavity 2 applies voltage to the contact that closes according to the timing of the turn/hazard flasher. When the contacts are closed it applies current to the hazard switch cavity 4. Current flows from cavity 4 through the closed contacts at cavity 1 and 2. The following lamps are turned on when cavities 1 and 2 are charged:
^ The left and right front turnlamp
^ The left and right rear turnlamp
^ The left and right indicator lamp