General Description

The headlamps are controlled by the headlamp switch located on the turn signal switch. Turn the end of the turn signal switch lever to the first position in order to turn on the parking/turn signal lamps. Turn the end of the of the turn signal switch lever to the second position in order to turn on the headlamps. The high-beam headlamp operation is controlled using the turn signal switch lever on the steering column. In order to change headlamp operation from low-beam to high-beam (or high-beam to low-beam), push the turn signal switch lever toward the instrument panel (until the detent is felt) and release. In order to change headlamp operation back to low-beam operation, pull the turn signal switch lever toward the driver (until the detent is felt) and release. The high-beam indicator (blue) in the instrument cluster will light during high-beam headlamp operation. A solid tone will sound as a reminder if you open the drivers door with the key out of the ignition and the headlamps on.