Removal and Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Open the hood.
2. Remove the headlamp housing bracket bolt from the headlamp bracket.
3. Pull the headlamp inboard to disengage the headlamp tabs from the headlamp bracket slots.




4. Pull the headlamp forward to access electrical connectors.
5. Disconnect the electrical connectors from the headlamp.
6. Remove the headlamp from the vehicle.
7. Remove the headlamp bulb/sockets from the headlamp by rotating counterclockwise.

INSTALLATION PROCEDURE




1. Install the headlamp bulb/sockets to the headlamp by rotating clockwise.
2. Connect the electrical connectors to the headlamp bulb/sockets.
3. Engage tabs on back of headlamp into the slots in the headlamp bracket.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the headlamp housing bracket bolt to the headlamp bracket.

Tighten
Tighten the headlamp housing bracket bolt to 7 N.m (62 lb in).