Tail Lamp: Service and Repair
REMOVAL PROCEDURE1. Reposition the rear compartment trim to access the tail lamp nuts.
2. Remove the tail lamp nuts.
3. Pull the tail lamp outward from the rear end finishing panel.
4. Remove the following wiring harness sockets from the tail lamp:
^ The tail lamp/stop lamp socket (1)
^ The tail lamp socket (2)
^ The back-up lamp socket (3)
^ The turn signal socket (4)
INSTALLATION PROCEDURE
1. Install the following wiring harness sockets to the tail lamp.
^ The turn signal socket (4)
^ The back-up lamp socket (3)
^ The tail lamp socket (2)
^ The tail lamp/stop lamp socket (1)
2. Install the tail lamp to the rear end finishing panel.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the tail lamp nuts.
Tighten
Tighten the tail lamp nuts to 3 N.m (27 lb in).
4. Reinstall the rear compartment trim.