Compressor Mounting Bracket Replacement

REMOVAL PROCEDURE




1. Remove the compressor.
2. Remove the compressor drive belt tensioner from the compressor mounting bracket.
3. Remove the compressor drive belt idler pulley from the compressor mounting bracket.




4. Remove the compressor bracket mounting bolt.
5. Remove the compressor bracket.

INSTALLATION PROCEDURE




1. Install the compressor mounting stud to the engine block.
2. Install the compressor mounting bracket onto the compressor mounting stud.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the compressor bracket mounting bolt.

Tighten
Tighten the bolt to 50 N.m (37 lb ft).




4. Install the compressor drive belt idler pulley to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt idler pulley to 50 N.m (37 lb ft).

5. Install the compressor drive belt tensioner to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt tensioner to 25 N.m (15 lb ft).

6. Install the compressor.