Manual Display DTC Mode

DIC Button Functions:

The manual display feature allows you to manually select each module DTC display function. The manual mode will automatically be entered after the automatic DTC display sequence is complete, or can be entered at any time during the automatic mode by pressing any button on the DIC except the E/M (E/M button is used to exit the DIAGNOSTIC mode at any time). When the manual mode is selected, the IPC will display the MANUAL DIAGNOSTICS mode message for 2 seconds, or until any button on the DIC except the E/M is pressed. After the MANUAL DIAGNOSTICS mode message is displayed, the IPC will display the first system abbreviation and quantity of codes stored for that system, then the IPC will wait for further instructions. The buttons on the DIC provide the following functions when operating the on-board diagnostic feature in the manual mode:

In both diagnostic modes, systems will be displayed in the following order:
^ PCM (Powertrain Control Module)
^ TCS (Traction Control System)
^ RTD (Real Time Damping) (with F45 option)
^ BCM (Body Control Module)
^ SDM (Sensing and Diagnostic Module)
^ IPC (Instrument Panel Cluster)
^ RADIO (Radio)
^ HVAC (Heater, Ventilation and Air Conditioning) (with CJ2 option)
^ LDCM (Left Door Control Module)
^ RDCM (Right Door Control Module)
^ SCM (Seat Control Module) (with AAB option)
^ RFA (Remote Function Actuation) (known as the remote control door lock receiver (RCDLR))

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes