Body Control Module (BCM)

The Body Control Module (BCM) contains the theft deterrent system logic. The BCM reads the PASSLOCK data from the PASSLOCK sensor. If the PASSLOCK data is correct, the BCM will send a class 2 message to the PCM to enable the fuel injectors and crank relay.

During the tamper mode the vehicle may start. The vehicle will then stall. If the BCM receives the wrong PASSLOCK data, the VTD system will immediately go into the tamper mode. The tamper mode will lock-out the vehicle fuel injectors and crank relay for 10 minutes. The SECURITY indicator will flash while the VTD is in the tamper mode.

If the PASSLOCK sensor sends a correct password to the BCM when the ignition is in the ON position, the BCM will send a fuel enable and crank relay enable signal to the PCM.