Steering Column Filler Replacement

Steering Column Filler Replacement

Removal Procedure




1. Remove the access cover from the left instrument panel (IP) fuse block.
2. Release the left IP insulator tabs from the lower IP trim pad retainers for access.
3. Remove the bolts from the steering column filler panel.
4. Release the steering column filler panel retainers from the IP lower trim panel. Carefully lower the panel away from the IP lower trim panel.
5. Disconnect the electrical connector from the rear compartment release switch.
6. Remove the rear compartment release switch.
7. Remove the steering column filler panel.

Installation Procedure




1. Install the rear compartment release switch.
2. Connect the electrical connector to the rear compartment release switch.
3. Align the steering column filler panel to the IP lower trim panel. Install the panel retainers to the IP lower trim panel.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the bolts to the steering column filler panel.

Tighten the bolts to 2 N.m (18 lb in).

5. Install the insulator tabs to the lower IP trim pad retainers.
6. Install the access cover to the left IP fuse block.