Coolant Level Indicator Module: Service and Repair
Coolant Level Module ReplacementRemoval Procedure
1. Remove the right diagonal brace.
2. Remove the battery.
3. Partially drain the cooling system.
4. Disconnect the low coolant module electrical connector.
Important: In order to unlock the low coolant module, lift one leg of the snap clip from its locked position and pull outward with a slight twisting motion.
5. Remove the low coolant module.
Installation Procedure
1. Lubricate the O-ring seal with coolant.
2. Position the snap clip leg in place.
3. Install the low coolant module.
4. Connect the low coolant module electrical connector.
5. Install the battery.
6. Install the right diagonal brace.
7. Fill the cooling system.