Trim Panel Replacement - Rear Seat Back (Right - AN2)

Trim Panel Replacement - Rear Seat Back (Right - AN2)

Removal Procedure





1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) .
2. Remove the right rear seat back cushion. Refer to Seat Back Replacement - Rear (Full Width) (Seat Back Replacement - Rear (Full Width))Seat Back Replacement - Rear (AN2) (Seat Back Replacement - Rear (AN2)) .
3. Unclip and remove the right rear side door sill trim plate (3).
4. Pull the right rear side door opening frame garnish molding (1) from the pinch weld flange (2) just past the top of the quarter upper trim panel.




5. Remove the right quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (Trim Panel Replacement - Rear Quarter Upper) in Interior Trim.
6. Remove the right rear seat belt lower anchor bolt (1).




7. Remove the following components from the vehicle:

* The plastic retainers
* The right rear seat back trim panel (1)




Installation Procedure





1. Install the right rear seat back trim panel (1) to the vehicle. Secure the trim panel with the plastic retainers.




2. Install the right rear seat belt lower anchor bolt (1).
3. Install the right quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (Trim Panel Replacement - Rear Quarter Upper) in Interior Trim.




4. Install the right rear side door opening frame garnish molding (1) to the pinch weld flange (2).
5. Install the right rear side door sill trim plate (3).
6. Install the right rear seat back cushion. Refer to Seat Back Replacement - Rear (Full Width) (Seat Back Replacement - Rear (Full Width))Seat Back Replacement - Rear (AN2) (Seat Back Replacement - Rear (AN2)) .
7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) .