Temperature Gage Replacement

REMOVAL PROCEDURE




1. Remove the instrument cluster retainer. Refer to Bezel Replacement - IP Cluster.

IMPORTANT: Do not remove the needle from the temperature gauge. There is no detent or flat spot on the shaft in order to indicate the correct placement.

2. Remove the 3 screws (4) which secure the temperature gauge to the instrument cluster case.




3. Remove the temperature gauge (4) from the instrument cluster case.

INSTALLATION PROCEDURE




1. Install the temperature gauge (4) to the instrument cluster case.




2. Secure the temperature gauge with the 3 screws (4).
3. Install the instrument cluster retainer. Refer to Bezel Replacement - IP Cluster.