Compressor Mounting Bracket

COMPRESSOR MOUNTING BRACKET REPLACEMENT







REMOVAL PROCEDURE
1. Remove the compressor.
2. Remove the compressor drive belt tensioner from the compressor mounting bracket.
3. Remove the compressor drive belt idler pulley from the compressor mounting bracket.







4. Remove the compressor bracket mounting bolt.
5. Remove the compressor bracket.








INSTALLATION PROCEDURE
1. Install the compressor mounting stud to the engine block.
2. Install the compressor mounting bracket onto the compressor mounting stud.
3. Install the compressor bracket mounting bolt.

NOTE: Refer to Fastener Notice in Service Precautions. Vehicle Damage Warnings

Tighten
Tighten the bolt to ....................50 N.m (37 lb ft).







4. Install the compressor drive belt idler pulley to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt idler pulley to ........................50 N.m (37 lb ft).

5. Install the compressor drive belt tensioner to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt tensioner to 25 N.m (18 lb ft).

6. Install the compressor.