Trunk / Liftgate Switch: Service and Repair

REAR COMPARTMENT LID SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
2. Use a small flat-bladed tool and gently pry the deck lid switch from the instrument panel (I/P) carrier.
3. Disconnect the electrical connector from the deck lid switch.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the deck lid switch.
2. Align the deck lid switch with the opening in the I/P carrier and apply inward pressure until fully seated.
3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.