License Plate Lamp: Service and Repair
LICENSE LAMP REPLACEMENTREMOVAL PROCEDURE
1. Remove the nearest inner tail lamp. Access the license lamp through the tail lamp opening.
2. Remove the socket from the license lamp assembly.Rotate the socket counterclockwise to disengage the locking tabs.
3. Reach through the tail lamp opening and hold the license lamp assembly in place, while removing the screws from the lamp assembly.
4. Remove the license lamp assembly through the tail lamp opening.
INSTALLATION PROCEDURE
1. Install the license lamp assembly through the tail lamp opening.
2. Position the lamp assembly and hold in place.
3. Install the screws securing the lamp assembly to the rear fascia.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the license lamp assembly retaining screws to 2 N.m (18 lb in).
4. Install the socket to the license lamp assembly. Rotate the socket clockwise to engage the locking tabs.
5. Install the inner tail lamp.