Diagnostic System Check - Trunk/Liftgate
DIAGNOSTIC SYSTEM CHECK - TRUNK/LIFTGATETEST DESCRIPTION
Steps 1-3:
Steps 4-6:
The number(s) below refer to the step number(s) on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
3. Determine if any Body Control Module or Powertrain Control Module DTCs are present.
4. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.