Marker Lamp Replacement - Side
MARKER LAMP REPLACEMENT - SIDEREMOVAL PROCEDURE
1. Remove the nearest outer tail lamp.
2. Remove the two nuts attaching the radio antenna bracket and position the antenna for access to the side marker lamp if equipped with a power antenna.
3. Remove the side marker lamp socket from the sidemarker lamp. Access the sidemarker lamp through the tail lamp opening.
4. Remove the sidemarker lamp retaining nuts.
5. Remove the sidemarker lamp.
INSTALLATION PROCEDURE
1. Position the sidemarker lamp to the fender.
2. Install the sidemarker lamp retaining nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear sidemarker lamp retaining nuts to 2 N.m (18 lb in).
3. Install the socket to the sidemarker lamp assembly.
4. Install the nuts attaching the radio antenna, if removed.
Tighten
Tighten the antenna bracket retaining nuts to 12 N.m (106 lb in).
5. Install the tail lamp.