Instrument Panel, Gauges and Warning Indicators: Adjustments

STRIKER ADJUSTMENT - INSTRUMENT PANEL (I/P) COMPARTMENT




1. Open the instrument panel (IP) compartment door.
2. Loosen the IP compartment striker screws.
3. Adjust the IP compartment striker, as required.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Tighten the IP compartment striker screws.

Tighten
Tighten the striker screws to 2 N.m (18 lb in).

5. Close the IP compartment.
6. Inspect the IP compartment for proper fit and operation. Repeat the procedure if required.