Instrument Panel (IP) - Trim Pad Replacement

Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet)

Removal Procedure

Caution: Refer to Restraint System Service Precautions in Service Precautions.

1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in Restraint Systems.
2. Remove the defroster grille screw.




3. With a flat-bladed tool disengage the defroster grille from the instrument panel (I/P) trim pad.
4. With a flat-bladed tool disengage the outer trim covers from the I/P carrier.
Pull the cover rearward to disengage the locating tabs from I/P carrier.
5. Open the I/P compartment.
6. Remove the I/P trim pad screws (1).
7. Remove the I/P trim pad (2) from the I/P carrier.

Installation Procedure




1. Install the I/P trim pad (2) to the I/P carrier.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the I/P trim pad screws (1).

Tighten the screws to 2.3 N.m (20 lb in).

3. Close the I/P compartment door.
4. Align the outer trim covers locating tabs into the I/P carrier.
Press the cover into the I/P carrier until fully engaged.
5. Install the defroster grille to the I/P trim pad.
6. Install the defroster grille screw.

Tighten the screw to 2.3 N.m (20 lb in).

7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in Restraint Systems.