Antenna: Service and Repair

FIXED ANTENNA REPLACEMENT

REMOVAL PROCEDURE




1. Remove the antenna mast from the antenna base (3).

NOTE: Use tape on the tool surface so that you do not damage the paint on the antenna mast.

2. Open rear compartment lid and pull back the carpet to expose the antenna base (3).
3. Remove the mounting bolts from the antenna base (3).
4. Pull the antenna base (3) downward through the antenna mounting spacer (1).
5. Disconnect the antenna lead (2) from the antenna base (3).

INSTALLATION PROCEDURE




1. Connect the antenna lead (2) to the antenna base (3).
2. Push the antenna base (3) upward through the antenna mounting spacer (1).
3. Install the antenna mounting bolts to the antenna base (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 1.9 N.m (17 lb in).

4. Reposition the carpet and close rear compartment lid.
5. Install the antenna mast to the antenna base (3).

Tighten the mast to 1.5 N.m (13 lb in).