Window Panel Lamp Replacement - Rear (Seo) (With RPO Code 6J6)

WINDOW PANEL LAMP REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the rear seat back.
2. Remove the bolts from the rear window panel lamp bracket(s).




3. Disconnect the electrical connector(s).
4. Remove the rear window panel lamp(s) from the rear window panel.

INSTALLATION PROCEDURE




1. Connect the electrical connector.




2. Position the rear window panel lamp bracket(s) to the rear window panel.
3. Install the bolts to the rear window panel bracket(s).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the window panel bolts to 3 N.m (27 lb in).

4. Install the rear seat back.