Accelerator Pedal Position Sensor: Service and Repair

ACCELERATOR PEDAL WITH POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left instrument panel (I/P) sound insulator.
2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).




3. Remove the APP sensor assembly bolts.
4. Remove the APP sensor assembly from the vehicle.

INSTALLATION PROCEDURE




1. Position the APP sensor assembly to the vehicle.
2. Install the APP sensor assembly bolts.

NOTE: Refer to Fastener Notice.

Tighten the bolts to 5 N.m (44 lb in).




3. Connect APP sensor electrical connector (1).
4. Install the left I/P sound insulator.