B3110

DTC B3110

DTC DESCRIPTOR

DTC B3110
Keyless Entry Transmitter 2 or Generic Low Battery

DIAGNOSTIC FAULT INFORMATION






IMPORTANT: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Testing and Inspection

CIRCUIT/SYSTEM DESCRIPTION
This fault sets if the key fob programmed to slot 2 has a low battery.

CONDITIONS FOR RUNNING THE DTC
The remote function actuation (RFA) system must be enabled.

CONDITIONS FOR SETTING THE DTC
The code sets after 3 consecutive low battery signals from the same programmed transmitter.

CONDITIONS FOR CLEARING THE DTC
The code is cleared as current when a normal transmitter voltage signal is received from any programmed transmitter.

ACTION TAKEN WHEN THE DTC SETS
The RFA system is inoperative.

REPAIR INSTRUCTIONS

IMPORTANT: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests