MPH (Km/h) Indicator Inoperative

MPH (KM/H) INDICATOR INOPERATIVE

DIAGNOSTIC FAULT INFORMATION

IMPORTANT: Always perform the Diagnostic System Check - Vehicle Testing and Inspection

CIRCUIT/SYSTEM DESCRIPTION
The English/Metric switch is a momentary switch embedded in the instrument panel cluster (IPC). Pressing and releasing the English/Metric switch changes the status of the IPC mph to km/h. Power and ground is provided to the English/Metric switch from the IPC. The IPC reads the switch input and will activate the English or Metric system when selected.

CIRCUIT/SYSTEM TESTING
1. Turn ON the ignition, with the engine OFF
2. Press and release the English/Metric switch.
- If both the mph indicator and the km/h indicator illuminates in the IPC, check for poor connections at the harness connector of the IPC.
- If the IPC does not display the mph and km/h indicator when switch is pressed and released, replace the IPC.

REPAIR INSTRUCTIONS

IMPORTANT: Always perform the Diagnostic Repair Verification Verification Tests

Control Module References for IPC replacement, setup and programming