Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement
Tools Required
^ J41712 Oil Pressure Sensor Socket

Removal Procedure





1. If necessary, remove the engine sight shield. Refer to Engine Sight Shield Replacement.
2. Disconnect the oil pressure sensor electrical connector (4).





3. Using J41712, remove the oil pressure sensor (706) and washer (707).

Installation Procedure





1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the threads of the oil pressure sensor.

2. Notice: Refer to Fastener Notice in Service Precautions.

Using J41712, install the oil pressure sensor (706) and washer (707).
Tighten the sensor to 20 Nm (15 ft. lbs.).





3. Connect the oil pressure sensor electrical connector (4).
4. If necessary, install the engine sight shield. Refer to Engine Sight Shield Replacement.