Low Fuel Indicator Inoperative

Low Fuel Indicator Inoperative

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Circuit/System Description

This diagnostic procedure applies to serial data indicator(s) located in the instrument panel cluster (IPC) which may include the low fuel indicator.

Circuit/System Testing

Ignition ON, with the scan tool, perform the IPC Displays Test in the IPC Output Controls. Verify that the low fuel indicator illuminates and turns off after the displays test.

If the indicator(s) does not perform the IPC Displays Test, replace the IPC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Control Module References for the IPC replacement, setup and programming