Sound Barrier Replacement - Rear Seat Cushion to Floorpan

Sound Barrier Replacement - Rear Seat Cushion to Floorpan

Removal Procedure

1. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement Rear Seat Back Cushion Replacement.

2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.





3. Lift the rear floor pan sound barriers (1) upward and pull outward in order to remove.

Installation Procedure

Warning

All floor pan insulator material must meet Federal Vehicle Safety Standards for flammability. Failure to do so could result in personal injury and/or vehicle damage.

Note:
Align the sound barriers in order to keep the seat belt and seat attachment areas clear.

Note:
When installing the barriers, ensure they are aligned with the respective holes in the sheet metal.

1. Ensure the attachment areas are clear.

2. Remove the backing of the sound barriers.

3. Route the sound barriers around the electrical harness.





4. Press firmly in all areas in order to secure the sound barriers (1) to the floor pan.

5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.

6. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement Rear Seat Back Cushion Replacement.