HVAC - Automatic

HVAC Control Module Replacement

Removal Procedure

1. Remove the close out panel, if equipped. Refer to Instrument Panel Insulator Panel Replacement - Right Side Instrument Panel Insulator Panel Replacement - Right Side.

2. Remove the right side floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Right Side (LHD) Floor Air Outlet Duct Replacement - Right Side (LHD).

3. Remove the right hand hinge panel. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.




4. Disconnect the HVAC control module electrical connectors (1).




5. Remove the HVAC control module to HVAC module assembly retaining screws (1).

6. Remove the HVAC control module (2) from the HVAC module assembly (3).

Installation Procedure




1. Install the HVAC control module (2) to the HVAC module assembly (3).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the HVAC control module to HVAC module assembly retaining screws (1) and tighten to 2 Nm (18 lb in).




3. Connect the HVAC control module electrical connectors (1).

4. Install the right hand hinge panel. Refer to Body Hinge Pillar Trim Panel Replacement Body Hinge Pillar Trim Panel Replacement.

5. Install the right side floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Right Side (LHD) Floor Air Outlet Duct Replacement - Right Side (LHD).

6. Install the close out panel, if equipped. Refer to Instrument Panel Insulator Panel Replacement - Right Side Instrument Panel Insulator Panel Replacement - Right Side.

7. Perform HVAC system relearn. Refer to HVAC System Control Module Programming and Setup Testing and Inspection.