86. Engine Oil Cooler Installation

Engine Oil Cooler Installation





Note:
Lubricate the oil cooler seal (8) with clean engine oil.

1. Install the engine oil cooler assembly (6) along with 2 NEW sealings (8) and (9).

2. Install the 3 oil cooler bolts (5) and tighten to 10 Nm (89 lb in).

3. Install the oil cooler coolant outlet pipe bolt (7) and tighten to 10 Nm (89 lb in).

4. Install the oil cooler coolant outlet hose (2) to the engine coolant thermostat housing.

5. Install the oil cooler coolant outlet hose clamp (1).

6. Install the oil cooler coolant inlet hose (4) to the water outlet.

7. Install the oil cooler coolant inlet hose clamp (3).