Fuel Tank Fuel Pump Module Replacement

Fuel Tank Fuel Pump Module Replacement

Special Tools

CH 45722 - Fuel Sender Lock Ring Wrench

For equivalent regional tools, refer Special Tools Tools and Equipment.

Removal Procedure





1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Service and Repair

2. Remove the fuel tank. Refer to Fuel Tank Replacement Removal and Replacement.

3. Disconnect the electrical connectors (1).

4. Disconnect the evaporative emission and fuel lines (2). Refer to Plastic Collar Quick Connect Fitting Service Procedures.





5. Using the CH 45722 - wrench, remove the lock ring (1) by turning counter-clockwise.





6. Remove the fuel pump module (1) and O-ring (2).

Installation Procedure





1. Install a NEW O-ring (2) and the fuel pump module (1).





2. Using the CH 45722 - wrench, install the lock ring (1) by turning clockwise.





3. Connect the electrical connectors (1).

4. Connect the evaporative emission and fuel lines (2). Refer to Plastic Collar Quick Connect Fitting Service Procedures.

5. Install the fuel tank. Refer to Fuel Tank Replacement Removal and Replacement.