Drive Belt Installation

Drive Belt Installation

Special Tools

* EN-955 - Locking Pins

* EN-48488 - Holding Wrench

For equivalent regional tools, refer to Special Tools Tools and Equipment.

Note: Ensure that the drive belt tensioner is held with EN-955-2 - locking pin.

1. Install the drive belt.




2. Move the drive belt tensioner clockwise until EN-955-20 - locking pin (2) can be removed. Use EN-48488 - wrench (1).

3. Remove EN-955-20 - locking pin (2) from the drive belt tensioner while holding with EN-48488 - wrench (1).

4. Release tension from drive belt tensioner and remove EN-48488 - wrench (1).