Claim and Warranty Information

Submit a Product Claim with the information indicated below:

Parts Failed **Parts Failure Labor Labor *Other
Count Part No. Allowance Code Operation Hours Hours

1 14057211 .22 00 V1870 .2 .1

Description: Install EGR bleed restrictor in accordance with the instructions outlined in this bulletin.

*Campaign Administrative Allowance

**Dealers will automatically be credited 30% of dealer net when parts are furnished at no charge by Chevrolet.

Dealers will automatically receive the correct parts and labor allowance based on the Labor Operation performed.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign claim submission.

CAMPAIGN IDENTIFICATION LABEL:

CAMPAIGN IDENTIFICATION LABEL

Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label". Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.


ADMINISTRATIVE PROCEDURE

REFER TO THE CURRENT CHEVROLET SERVICE POLICIES AND PROCEDURES MANUAL AND CLAIMS PROCESSING MANUAL FOR CAMPAIGN HANDLING AND ADMINISTRATIVE PROCEDURES.

Dear Chevrolet Owner:

General Motors has determined that some 1982 C10 and 1983 C10-20, K10 Series Light Duty Chevrolet Trucks equipped with 4.1 liter L6 engines and automatic transmissions may be emitting pollutants in excess of Federal Emission Standards.

The exhaust gas recirculating (EGR) bleed restrictor may have been omitted in the exhaust emission control harness assembly. The absence of this bleed restrictor may result in poor engine performance and failure to meet NO(x) emission standards.

To bring your vehicle into compliance with applicable emission requirements, Chevrolet Dealers will install the EGR bleed restrictor. This service will be performed at no charge to you. Please contact your Chevrolet Dealer on or after the date shown below to arrange an appointment to have this condition corrected.

Instructions for making this correction have been sent to you dealer. It is estimated that parts will be available at your dealer on or about November 22, 1983. The labor time for making this modification is approximately 20 minutes.

The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction to your vehicle in the shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage paid owner reply card and returning it to us.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued satisfaction with our products.