Service Procedure

New Vacuum Tee Installation:

1. Raise hood.

2. Remove air cleaner assembly.

3. Remove vacuum tee that contains hoses from the EGR valve, air cleaner and carburetor vacuum part (Refer to illustration).

4. Install new vacuum tee P/N 14057211 as shown in illustration.

5. Reinstall air cleaner and hoses to the EGR valve, air cleaner and carburetor vacuum.

6. Install campaign label.

7. Close hood.
PARTS INFORMATION

Part Number 14057211, bleed restrictor, required to complete this campaign is to be obtained by the dealer from the Chevrolet Zone Service Department. Parts will be furnished to the dealer on a no charge basis.

Part Number Quantity Description

14057211 1 EGR Bleed
Restrictor

Parts are not to be ordered from or returned to the Warehousing Distribution Division of General Motors (WDDG).