Vehicles Involved, Owner, Dealer & Parts Information
VEHICLES INVOLVEDListed below are the 1989 Chevrolet R/V 2500 Series Suburban Flint assembled trucks involved in the Campaign:
MODEL YEAR PLANT FROM THROUGH
R/V-2500 1989 Flint KF100001 KF145892
Series
Involved vehicles have been identified by Vehicle Identification Number Computer Listings. Computer listings contain the complete Vehicle Identification Number, owner name and address data, and are furnished to involved dealers with the campaign bulletin. Owner name and address data furnished will enable dealers to follow-up with owners involved in this campaign.
These listings may contain owner names and addresses obtained from State Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to complete this campaign. Any dealer not receiving a computer listing with the campaign bulletin has no involved vehicles currently assigned.
OWNER NOTIFICATION
Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of owner letter included with this bulletin).
DEALER CAMPAIGN RESPONSIBILITY
Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealers service in the future, you should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.
Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required correction according to instructions contained in this bulletin.
PARTS INFORMATION
A new label required for each vehicle involved will be mailed to owners of record and involved dealers (stock units) on a no charge basis.
Part Number Description Quantity/Vehicle
10123819 Emission Label 1
SERVICE PROCEDURE
1. Open hood of vehicle.
2. Using a clean, dry cloth, wipe dirt, oil etc. from the top center of the radiator support (see illustration).
3. Remove backing from the new label and apply to clean panel.
4. Beginning at the center of the label and using a clean, dry cloth, smooth and secure the new label. Any air bubbles can be removed by puncturing with a pin and smoothing with the cloth.