Seat Belt - Inoperative After Extended Child Seat Usage

91chevy12

Number: 90-413-10

Section: 10

Date: March 1991

Corp. Bulletin No.: 061606


Subject: SEAT BELT TEMPORARILY INOPERATIVE AFTER EXTENDED CHILD SEAT USAGE


Model and Year: 1989-90 M VAN AND 1990 L VAN WITH BENCH SEATS


Some 1989-1990 M/L van owners may experience, on a temporary basis, the inability to pull out (extend) the right hand intermediate seat lap belt after the seat belt is used to retain a child seat for an extended period of time without periodically cycling (retracting and extending) the belt.

To prevent this condition from recurring, it is necessary to replace the seat belt assembly with an internally modified (shortened pendulum nib height) belt assembly. There is no visual difference between the existing and revised seat belt assembly. Part numbers have been changed to identify the revised assemblies.

Figure 1 - Intermediate Bench Seat Belts:

REPLACEMENT PROCEDURE: (Figure 1)

NOTE: The following instructions apply only to the RIGHT outer side of bench seat.

1. Remove nut (1) and disconnect the retractor assembly (2) from the support bracket (3,) and remove seat belt from seat.

2. From the list of part numbers below, use the applicable part and install new seat belt assembly (retractor assembly) to the support bracket nut (1 and 2). Tighten the nut to 53 N-m (39 lbs.ft.).


SERVICE PARTS INFORMATION

New Replaces Description
Part Part Intermediate Bench
Number Number Seat Belt Asm.

15637020 15617858 Dk.Cognac
15637016 15617855 Dk. Blue
15637022 15617857 Med. Dk. Gray
15637018 15633770 Dk.Red

Parts are currently available from GMSPO.


WARRANTY INFORMATION

For vehicles repaired under warranty use:

Labor Operation: C9280

Use applicable labor time guide for labor hours.