| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Camshaft, Renew | 2.9 | 0.0 | A | |
| Main Bearings, Renew | 1.4 | 0.0 | A | |
| Crankshaft, Renew | 4.2 | 0.0 | A | |
| Oil Pump, Renew | 0.9 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| Rear Main Seal, Renew | 1.6 | 0.0 | A | |
| Timing Chain, Renew | 1.5 | 0.0 | A | |
| Valve Lifters, Renew | 1.6 | 0.0 | A | |
| Tune-Up | 0.8 | 0.0 | A | |
| One CYL |
| Right Bank | 9.5 | 6.8 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 9.8 | 7.0 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 14.0 | 10.0 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| All Cyls |
| Right Bank | 11.6 | 8.3 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Left Bank | 11.9 | 8.5 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Both Banks | 17.5 | 12.5 | A | Includes: R&R Cylinder Head & Oil Pan, Hone Cylinders And Plastigage Bearings. |
| Note |
| To Grind Valves, Add | 3.5 | 2.5 | A | |
| With AC, Add | 0.4 | 0.2 | A | |
| With A.I.R., Add |
| Right Bank | 0.5 | 0.3 | A | |
| Left Bank | 0.4 | 0.2 | A | |
| Both Banks | 0.8 | 0.5 | A | |
| With Oil Cooler, Add | 0.2 | 0.1 | A | |
| With Skid Plate, Add | 0.4 | 0.2 | A | |