Service Procedure

1. Open driver's door.


2. Verify that the Vehicle Identification Number (VIN) of the new certification label is the same as on the existing label.

If the VIN of the new certification label is different from the existing label, contact the Chevrolet Dealer Assistance Center to arrange to receive the correct label. 1-800-222-1020.

If the VIN of the new certification label is the same as on the existing label, follow the remaining steps of this procedure and install the new label.

3. With an appropriate instrument, lift corner of the old certification label and peel from door edge.

4. Clean area where new label will be installed.


5. Remove protective backing from new label, and carefully apply to vehicle in same location as original label.


NOTICE: DO NOT ATTEMPT TO REMOVE OR LOOSEN THE NEW LABEL ONCE IT HAS BEEN APPLIED AS THIS WILL DAMAGE THE LABEL AND MAKE IT ILLEGIBLE.


6. Install Campaign Identification Label.