Reading and Clearing Diagnostic Trouble Codes

PKE II Module Diagnostic Trouble Code Chart:

TROUBLE CODE DISPLAY
The Diagnostic Trouble Code (DTC) code is indicated by the Programming Switch/Diagnostic Lamp. The DTC is displayed by two flash patterns separated by a pause: DTC 12 flash, pause, flash, flash; DTC 13 flash, pause, three flashes, etc. Each DTC will be displayed three times before a new DTC can be broadcast. DTC 14 will set when any working, unprogrammed transmitter is brought into PKE II Antenna Range. DTC 15 will set when a working, programmed transmitter is brought into antenna range. DTC 16 will set when a working, programmed transmitter is manually activated via its push button.

SYSTEM DEFAULT AFTER EXITING DIAGNOSTIC MODE
Upon exiting the diagnostic mode, the PKE II System will default to a passive mode "OFF" condition.

REACTIVATING PASSIVE MODE
To reactivate the passive mode functions, refer to Chart 2 PKE/SS System Reset. Chart 2 PKE/SS System Reset