Fuel System Pressure Relief Procedure

CENTRAL MFI PRESSURE RELIEF PROCEDURE

TOOLS REQUIRED (or equivalents)
- J 34730-D Fuel pressure gage and/or
- J 34730-250 Fuel pressure adapter

PROCEDURE
1. Disconnect negative battery terminal to avoid possible fuel discharge if an accidental attempt is made to start the engine.
2. Loosen fuel filler cap to relieve tank vapor pressure.
3. Connect fuel pressure gage to fuel pressure connection tap. Wrap a shop towel around fitting while connecting gage to avoid spillage.
4. Install bleed hose into an approved container and open valve to bleed system pressure. Fuel connections are now safe for servicing.
5. Drain any fuel remaining in gage into an approved container.