Lack of Power/Sluggish/Spongy/Stumble

DEFINITION
The engine delivers less than expected power. There is little or no increase in speed when partially applying the accelerator pedal.

PRELIMINARY CHECKS

^ Refer to Important Preliminary Checks. Testing and Inspection
^ Compare the customer's vehicle with a similar unit. Make sure the customer has an actual problem.
^ Remove the air filter and check for dirt or a restriction.
^ Check the transmission shift pattern and the downshift operation. Refer to Transmission Controls.

FUEL SYSTEM CHECKS

^ Check for a restricted fuel filter, contaminated fuel, or improper fuel pressure. Refer to Fuel System Diagnosis. System Diagnosis - Fuel System
^ Perform the fuel injector balance test. Refer to Fuel Injector Balance Test.
^ Check for the proper ignition output voltage with the spark tester J 26792 or the equivalent.
^ Check the Knock Sensor (KS) system. Refer to DTC P0327 Knock Sensor Noise Channel Low Voltage. P0327

EXHAUST SYSTEM CHECKS

^ Check the exhaust system for a possible restriction. Refer to Restricted Exhaust System Check. System Check - Restricted Exhaust
^ Inspect the exhaust system for damaged or collapsed pipes. Inspect the muffler for heat distress or a possible internal failure.

ADDITIONAL CHECKs

^ Check the Control Module grounds for being clean, tight, and in their proper location.
^ Check the EGR Valve for being open or partially open all the time. Refer to EGR System Check. System Check - EGR
^ Check the Torque Converter Clutch (TCC) operation. Refer to the Torque Convener Clutch Solenoid in Automatic Transmission.
^ Check the A/C operation. Refer to A/C Compressor Clutch Control Diagnosis. A/C Compressor Clutch Control Diagnosis
^ Check the generator output voltage. Refer to Engine Electrical.

ENGINE MECHANICAL CHECK
Check the engine for the proper operation of the following items:

^ Engine compression
^ Valve timing
^ Improper or worn camshaft. Refer to Engine Mechanical.