Troubleshooting Hints - Gauges and Warning Indicators

1. Check condition of GAGES Fuse 4. If fuse is blown, LOCATE and REPAIR source of overload. Replace fuse.
2. If fuse is not blown proceed with Diagnostics.
3. If panel illumination; turn signal indicators, high beam indicator and safety belt indicator are all inoperative, check BLK (150) wire for an open.
4. If all indicators (except those noted in hint 3) and all gages are inoperative, check PNK (39) wire for an open.
5. If all gages and PRNDL display are inoperative, check BLK/WHT (151) wire for an open.