Instrument Panel Trim Pad Replacement

Instrument Cluster:

Fig. 11 Driver Knee Bolster.:

Instrument Panel Trim Pad:

Instrument Panel Extention:

Remove or Disconnect
1. Disable SIR system. Refer to "Disabling the SIR System."
2. Instrument cluster.
3. Two screws behind from behind the instrument cluster retaining the trim pad to the I/P carrier.
4. I/P knee bolsters.
5. Four screws retaining the pad to the top of each I/P knee bolster bracket.
6. Roll the I/P back, but do not remove it.
7. Ventilation ducts.
8. Four screws retaining the trim pad to the I/P carrier.
9. Trim pad from the vehicle.

Install or Connect
1. Trim pad to the vehicle.
2. Four screws retaining the trim pad to the I/P carrier.
3. Ventilation ducts.
4. I/P to the vehicle.
5. Four screws retaining the pad to the top of each I/P knee bolster bracket.
6. I/P knee bolsters.
7. Two screws from behind the instrument cluster retaining the trim pad to the I/P carrier.
8. Instrument cluster.
9. Enable SIR.