Tail Lamp: Service and Repair

Description:

Remove or Disconnect
1. Battery ground (negative) cable.
2. Open liftgate.
3. Screws from taillamp.
4. Pull taillamp from body.
5. Electrical connector.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Electrical connector.
2. Align taillamp locking guide pins to body.
3. Press taillamp into locking guide pin holes.
4. Screws to taillamp.

Tighten
- Screws to 10 N.m (89 lb.in.).

5. Close liftgate.
6. Battery ground (negative) cable.