RH Front Window Switch

When the Ignition Switch is in "RUN," battery voltage is applied to the RF Window Switch from the PWR WDO/RR VENT Circuit Breaker (CKT 141). When the "UP" position in the RF Window Switch is pressed, battery voltage is applied to the RF Window Regulator Motor through the DK BLU (CKT 666) wire. The motor is grounded through the BRN wire (CKT 667), the down contact in the RF Window Switch, the TAN wire (CKT 167), and the down contact in the LF Window Switch, and (CKT 750) to G302. The motor runs to drive the window up. When the "DN" position in the RF Window Switch is pressed, battery voltage is applied to the RF Window Regulator Motor in the opposite direction through the BRN wire (CKT 667). The Motor is grounded through the DK BLU wire (CKT 666), the up contact in the RF Window Switch, the LT BLU wire (CKT 166), the up contact in the LF Window Switch, and the BLK wire (CKT 750) to G302. The motor runs to drive the window down.