Changing the Interior Lighting Mode

Perform the following procedure to change the interior lighting mode:
1. Turn off the I/P dimmer switch.
2. Turn the ignition switch to the LOCK position.
3. Remove the BCM PRGRM fuse.
4. Turn the ignition switch to the ACC position.
- The BCM sounds the chime a number of times equivalent to the BCM type installed on the vehicle (1, 2, 3, or 4 chimes).
- Now the BCM has entered the feature customization mode.
5. To advanced the interior lighting mode, cycle the lip dimmer switch from off to DOME, back to off.
- The BCM sounds the chime a number of times equivalent to the lighting mode. A transition past mode 4 repeats the sequence starting with mode 1.

The lighting modes are as follows:
- Mode 1: Exit illumination and delayed illumination are disabled.
- Mode 2: Delay illumination is enabled.
- Mode 3: Exit illumination is enabled.
- Mode 4: Exit illumination and delayed illumination are enabled.

To exit and save the current customization mode:
1. Turn the ignition switch to the LOCK position.
2. Reinstall the BCM PRGRM fuse.